![Di[manganese(1+)],1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1,kN4, kN7)ethane-di-µ-oxo-µ-(ethanoato-kO,kO’)-,di[chloride(1-)] Featured Image](http://cdn.globalso.com/ptgchemical/Pegasus-Chloride-25-1.png)
![Di[manganese(1+)],1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1,kN4, kN7)ethane-di-µ-oxo-µ-(ethanoato-kO,kO’)-,di[chloride(1-)]](http://cdn.globalso.com/ptgchemical/Pegasus-Chloride-25-2.jpg)
![Di[manganese(1+)],1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1,kN4, kN7)ethane-di-µ-oxo-µ-(ethanoato-kO,kO’)-,di[chloride(1-)]](http://cdn.globalso.com/ptgchemical/Pegasus-Chloride-25-1.jpg)
![Di[manganese(1+)],1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1,kN4, kN7)ethane-di-µ-oxo-µ-(ethanoato-kO,kO’)-,di[chloride(1-)]](http://cdn.globalso.com/ptgchemical/d2badad1.jpg)
Di[manganese(1+)],1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1,kN4, kN7)ethane-di-µ-oxo-µ-(ethanoato-kO,kO’)-,di[chloride(1-)]
|
Commercial Code |
Pegasus Chloride 25 |
|
|
Appearance |
Dark green powder |
|
|
Active Content |
25 ± 1 % |
|
|
Applications |
•Low temperature pre-treatment •Raw cotton bleaching •Wood pulp bleaching •Fast paint drying catalyst that possible to replace CoII(2-EH)2 •Good drying performances obtained and better than CoII(2-EH)2 •Radical-based alkyd resin curing |
|
|
Main Characteristics |
Pegasus Chloride 25 showes good paint drying activity, which is much higher than observed for MnII(2-EH)2. Furthermore, it was noted that the color change of the paint due to the addition of the red manganese catalyst was acceptable. In addition, in the long oil alkyd paint, a good performance was noted (through-drying time was much shorter (5h) than the Co-soap mixture (>20h) with a slightly lower hardness value). |
|
|
Packing: |
Supplied as a 25% solid (containing NaCl) in a 5kg pack |
|
|
Storage |
It is advised to store in neutral or slightly alkaline detergent environment. Under these conditions product has a shelf life of ≥ 6 months |
|
|
Typical properties
|
Melting point |
>300 °C |
|
Form |
Powder |
|
|
Oder |
oderless |
|
|
PH |
7.1 |
|
Safety
When handling this product, please comply with the advice and information given in the safety data sheet and observe protective and workplace hygiene measures adequate for handling chemicals.
Note
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain proper- ties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights, etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. The agreed contractual quality of the product results exclusively from the statements made in the product specification. It is the responsibility of the recipient of our product to ensure that any proprietary rights and existing laws and legislation are observed.
